Brainless Hood Retards floor price and stats · PackRadar
PackRadar
/
Connect Wallet
Brainless Hood Retards
OpenSea
0x7325…2686
1,420 items
SEP 2026
5% creator fee
pfps
Floor price
$0.22
24h volume
$0.39
Total volume
$9,114.87
Owners (unique)
793 (56%)
Score
0
Overview
Items
Holders
Traits
Activity
Analytics
About
Traits
All
1877
Attachment
161
Background
1
Class
10
Contents
146
Failure Mode
115
Family
172
Format
1
Garment
51
Interaction
74
Interior
8
Morphology
53
Object
449
Opening Method
22
Process
206
Provenance
3
Relationship
25
Secondary Figure
6
Staging
316
Text
50
View
8
115 TRAITS · 1,420 ITEMS
Trait
Trait count
Rarity
nothing can be keyed to both ends at once
Failure Mode
1
<0.1%
the jug beneath it drawn empty to the bottom
Failure Mode
1
<0.1%
worn down to the corner bristles
Failure Mode
1
<0.1%
and the horn has snapped off
Failure Mode
1
<0.1%
the joint opening where the whole load comes onto it
Failure Mode
1
<0.1%
the hinge worn where the door always rests open, every blank still pale
Failure Mode
1
<0.1%
and it is still loading
Failure Mode
1
<0.1%
the water entering top left and leaving bottom right, the head level in it
Failure Mode
1
<0.1%
everything that feeds the bell is complete and the bell is not
Failure Mode
1
<0.1%
and the small wheel does the steering
Failure Mode
1
<0.1%
heat rising evenly from the whole face with nothing on it
Failure Mode
1
<0.1%
each lap opening uphill, so the covering gathers water instead of shedding it
Failure Mode
1
<0.1%
every tile holding the same standing water, nothing moving along the run
Failure Mode
1
<0.1%
and it has put out a shoot
Failure Mode
1
<0.1%
brim-full with a small square of surface, beside a wide shallow pan of the same make
Failure Mode
1
<0.1%
the knocking is meant to shake grain down and there is none
Failure Mode
1
<0.1%
and it has been overfilled past the line
Failure Mode
1
<0.1%
and the top half is still empty
Failure Mode
1
<0.1%
and it is firing on three
Failure Mode
1
<0.1%
and the combination is forgotten
Failure Mode
1
<0.1%
and it has lost its fizz
Failure Mode
1
<0.1%
and it is planted and bubbling
Failure Mode
1
<0.1%
and it has bolted
Failure Mode
1
<0.1%
and it has taken the place of the head
Failure Mode
1
<0.1%
and everything has gone cold in the correct order
Failure Mode
1
<0.1%
the whole charge sitting on the floor of it, the shaking continuing
Failure Mode
1
<0.1%
eight turned legs beside it, all identical and all wrong
Failure Mode
1
<0.1%
the right side of the belly standing unbroken
Failure Mode
1
<0.1%
and the crown has collapsed into the funnel
Failure Mode
1
<0.1%
and someone is chopping at it
Failure Mode
1
<0.1%
both ends dry beside a twin holding its seal
Failure Mode
1
<0.1%
the rule bridging on two end points over a wide dish in the middle
Failure Mode
1
<0.1%
and the rim is torn open
Failure Mode
1
<0.1%
a straight column of smoke standing from it
Failure Mode
1
<0.1%
nothing held between the jaws
Failure Mode
1
<0.1%
and it is vegetable throughout
Failure Mode
1
<0.1%
the bolt running out where nothing meets it, the fixings never disturbed
Failure Mode
1
<0.1%
and it has been installed facing north
Failure Mode
1
<0.1%
and both figures have come out at once
Failure Mode
1
<0.1%
the same profile square and untouched along the whole rest either side
Failure Mode
1
<0.1%
no space left anywhere, against a second skep beside it whose bars stand clear
Failure Mode
1
<0.1%
and the spout stands open
Failure Mode
1
<0.1%
and the arc falls short of his own mouth
Failure Mode
1
<0.1%
two chutes beneath it delivering two heaps of the same thing
Failure Mode
1
<0.1%
anything wider bridges the trough and rocks instead of bedding
Failure Mode
1
<0.1%
and the lid will not stay open
Failure Mode
1
<0.1%
it grips nothing and hangs on the crushed collar above it
Failure Mode
1
<0.1%
it presses the bark flat and passes over it without breaking any
Failure Mode
1
<0.1%
nothing below the tap can ever be drawn off
Failure Mode
1
<0.1%
and it is burning down
Failure Mode
1
<0.1%
the slot full length and the blade fixed at one shallow angle
Failure Mode
1
<0.1%
eleven more stacked beside it cut to the same wrong splay
Failure Mode
1
<0.1%
the whole pair leaning one way, matching each other exactly
Failure Mode
1
<0.1%
no room left for the taper to be driven, the joint fixed where it is
Failure Mode
1
<0.1%
and it rights itself, eventually
Failure Mode
1
<0.1%
and the pestle is missing
Failure Mode
1
<0.1%
the outside flush and unfixed, the stitching where the foot would be
Failure Mode
1
<0.1%
it can only be lifted from one side and tips as it comes up
Failure Mode
1
<0.1%
and the stem is still attached
Failure Mode
1
<0.1%
there is not enough blade left to lay flat on the work
Failure Mode
1
<0.1%
every mould it sweeps carries the worn line instead of the bell's
Failure Mode
1
<0.1%
and it is full to the brim
Failure Mode
1
<0.1%
and it is showing a 404
Failure Mode
1
<0.1%
an even margin all round from the finishing done after the fitting
Failure Mode
1
<0.1%
it has taken the bend permanently and will not straighten to throw
Failure Mode
1
<0.1%
one bubble centred and the other hard over at the same moment
Failure Mode
1
<0.1%
and it will not stop ringing
Failure Mode
1
<0.1%
the stepped line spiralling instead of closing
Failure Mode
1
<0.1%
the hairs standing in a closed loop with no free end
Failure Mode
1
<0.1%
and it was taken off just before the whistle
Failure Mode
1
<0.1%
the spike facing away from the work, so nothing can be holed
Failure Mode
1
<0.1%
and it has wound down
Failure Mode
1
<0.1%
and the game is unfinished
Failure Mode
1
<0.1%
and it is 16,084 unread
Failure Mode
1
<0.1%
the two rows meeting point to point, nothing interlocking
Failure Mode
1
<0.1%
and nothing has ever landed in it
Failure Mode
1
<0.1%
and the handle is on the side he cannot reach
Failure Mode
1
<0.1%
the nail is finished and cannot come out of the tool that finished it
Failure Mode
1
<0.1%
a single slack seam from base to top with sound work either side of it
Failure Mode
1
<0.1%
the pattern's shape bulging at the joint line, the runner standing open
Failure Mode
1
<0.1%
the core must come off for the bell to exist and it has set fast
Failure Mode
1
<0.1%
a bulge beginning at mid height where the lean should have been
Failure Mode
1
<0.1%
the whole length of rail behind it showing no take-up
Failure Mode
1
<0.1%
and it is erupting
Failure Mode
1
<0.1%
struck off level and full to the brim over a hand of fill
Failure Mode
1
<0.1%
the man holding entirely still while it goes round
Failure Mode
1
<0.1%
the drawn length leaving the plate at the size it entered
Failure Mode
1
<0.1%
and it is standing open and empty
Failure Mode
1
<0.1%
the three clamps are perfectly set and reach nothing
Failure Mode
1
<0.1%
the wing standing clear of the work at every stroke
Failure Mode
1
<0.1%
four long openings between shank and socket the whole depth
Failure Mode
1
<0.1%
nothing to cant it, so it lies flat with both flukes clear of the ground
Failure Mode
1
<0.1%
and it has not been touched in years
Failure Mode
1
<0.1%
and it has gone out driving
Failure Mode
1
<0.1%
the clip standing inward over the opening, where nothing can seat against it
Failure Mode
1
<0.1%
and it is leaking out through the nose
Failure Mode
1
<0.1%
and it is chipped all over
Failure Mode
1
<0.1%
the handle standing out under the face where no blow can be swung
Failure Mode
1
<0.1%
every brick made in it carries the same missing corner
Failure Mode
1
<0.1%
and it leaks from every seam
Failure Mode
4
0.3%
and it has melted out of shape
Failure Mode
5
0.4%
and it rattles when he moves
Failure Mode
6
0.4%
and it has split down one side
Failure Mode
7
0.5%
and it has been badly patched
Failure Mode
7
0.5%
and it is on upside down
Failure Mode
8
0.6%
and it is worn through to holes
Failure Mode
10
0.7%
and it is overflowing
Failure Mode
11
0.8%
and it is running at full tilt with nothing in it
Failure Mode
11
0.8%
and it is jammed halfway
Failure Mode
12
0.8%
and the part that matters is missing
Failure Mode
13
0.9%
and it is clogged solid
Failure Mode
14
1.0%
and it has run bone dry
Failure Mode
17
1.2%
and it has been squeezed flat
Failure Mode
17
1.2%
and someone has already emptied it
Failure Mode
19
1.3%
and the moving part has seized
Failure Mode
20
1.4%
